Disassembly

SERVICE MANUAL

MOTOR AND SUCTION FAN DISASSEMBLY/ASSEMBLY

1.Engage the parking brake with the lever (66).

2.Turn the ignition key (76) to OFF position and remove it.

3.With a ladder and the help of an assistant, disengage the fasteners (A) of the breather ﬁ lter hood (B).

4.Open the hood (C) and install the safety pin (D).

5.Remove the mounting screws (E), then remove the breather ﬁ lter (F).

6.Disconnect the hoses joints (G) and (H) from the suction fan motor (I).

7.Remove the mounting nuts (J) of the ﬂ ange (M).

8.With an appropriate hoisting system, remove the suction fan motor assembly (K) by removing the silicone along the perimeter

(L) of the ﬂ ange (M), then sling the assembly (K) by placing a rope around the motor (I) and the ﬁ ttings (N).

9.At the workbench, remove the screw (O) and the fan (P).

10.Remove the nuts (Q) from the screws (R).

11.Remove the motor (I) from the ﬂ ange (M).

12.Assemble the components in the reverse order of disassembly and note the following:

•Remove the silicone along the perimeter (L) of the ﬂ ange (M) and from the ﬂ ange housing on the hopper.

•Apply new silicone along the perimeter (L) of the ﬂ ange (M).

B AC D

S300870

RS 501

33015500(3)2008-02