ENGLISH
SERVICE MANUAL
HYDRAULIC SYSTEM
HYDRAULIC SYSTEM OIL DRAIN FILTER REPLACEMENT
CAUTION!
This procedure must be performed with the hopper (3) fully retracted.
1.Engage the parking brake with the lever (66).
2.Turn the ignition key (76) to OFF position and remove it.
3.Open the right lid (20) by releasing the fasteners (21) with the supplied key.
4.Unscrew and remove the cover (A).
WARNING!
Hydraulic system oil is highly corrosive, wear rubber gloves.
CAUTION!
The hydraulic system oil and filters should be disposed of properly according to the environmental Laws in force.
5.Remove the drain fi lter (B) and replace it with a new one.
6.Install the cover (A).
7.Close the right lid (20) by engaging the fasteners (21) with the supplied key.
S301623
108
RS 501
