C o n t a c t s
■Add new contacts
Save a name and number
1.In the standby mode, enter the phone number you wish to save.
2.Select Save.
3.Enter the name, and select OK > Done.
When you enter a number, you can select Options > Insert pause ('p') to insert a pause code or Options > Insert wait ('w') to insert a wait code. See "Insert dialing codes," p. 33, for additional information.
Save a number (only)
In the standby mode, enter the phone number you wish to save, and select and hold Options..
Save a contact
1.In the standby mode, select Menu > Contacts > Names > Options > Add new.
2.Enter the name, and select OK.
3.Enter the phone number, and select OK.
Insert dialing codes
Insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a
Automate voice mail with dialing codes. For more information, see "Automate voice mail," p. 30.
Press * repeatedly to cycle through dialing codes. When the desired code is displayed, pause briefly, and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
*Bypasses a set of instructions.
+Causes the international access code to be replaced by +.
p | Pauses for 2.5 seconds before sending any numbers that follow. |
wWaits for you to press the call key before sending the numbers or codes that follow.
33
