Nokia 2855i manual Loopset, Charger, Hearing aid

S e t t i n g s

Default profile—Select the profile you wish to be automatically activated when a car kit is connected.

Automatic answer—Calls are answered automatically after one ring when a car kit is connected. Select On or Off.

Lights—Select to keep the phone lights always on, or to shut off automatically after several seconds. Select On or Automatic.

Loopset

A LPS-4 Loopset accessory allows your device to optimize sound quality when coupled with a hearing aid that is set to T-coil mode.

In the standby mode, select Menu > Settings > Other settings > Enhancements > Loopset > Use Loopset > Yes or No.

If the Loopset is connected and recognized through the Pop-Port™ connector, the phone automatically uses the Loopset.

TTY/TDD

Check with the manufacturer of the TTY/TDD device for a connecting cable that is compatible with your phone. TTY/TDD communications depend on network availability. Check with your service provider for availability and description of services.

In the standby mode, select Menu > Settings > Other settings > Enhancements > TTY/TDD > Use TTY > Yes or No.

Charger

In the standby mode, select Menu > Settings > Other settings > Enhancements > Charger and one of the following:

Default profile—Select the profile you want to automatically activate when your phone is connected to the charger.

Hearing aid

To optimize sound quality, you can set your phone to couple to a T-coil-equipped hearing aid.

In the standby mode, select Menu > Settings > Other settings > Enhancements > Hearing aid > T-coil hearing aid mode. Select On to activate the HAC. Verify that the hearing aid is set to T-coil mode, and hold the phone against the ear.

Only activate the T-coil hearing aid mode when using your device with a hearing aid or it may impact the audio performance of the device.

57