Nokia 9000il In-call options Menu, SIM card memory status Menu 8, Copy between memories Menu 8

13-14	Detailed menus list
The memory selection does not affect the	number and, therefore, the number cannot be
communicator interface applications, which will	shown. If the SIM card is activated with several
always use “B” memory.	phone numbers, you may scroll the list.

SIM card memory status (Menu 8 2)

Within this submenu, you may review the num- ber of empty and full memory locations on the SIM card.

Copy between memories (Menu 8 3)

Within this submenu, you can copy phone num- bers and names between the communicator memory and the SIM card memory. You can copy:

From phone to SIM card (Menu 8 3 1)

You can choose to copy contact cards One by one (Menu 8 3 1 1) or copy all Speed dials (Menu 8 3 1 2).

Note: All Contacts directory contacts may not fit in the SIM card.

From SIM Card to Phone (Menu 8 3 2)

You can copy locations One by one (Menu 8 3 2 1) or Copy all SIM card locations (Menu 8 3 2 2) to the Contacts directory.

Note: All copied phone numbers go to the Tel field of the contact card. If you want to send SMS messages to these numbers, they must be moved to the Tel(GSM) field.

Erase SIM card memory (Menu 8 4)

This function allows you to remove phone num- bers and names from some or all locations of the SIM, or “A,” memory (not the communicator memory). The SIM memory does not need to be selected in order to erase its contents.

Note: Once erased, the memory contents are permanently lost.

You can erase individual locations One by one (Menu 8 4 1) or Erase all locations (Menu 8 4 2).

Show own number (Menu 8 5)

You may view the phone number(s) assigned to the SIM card you are currently using, i.e. your own phone number(s). Some SIM cards do not hold the

In-call options (Menu 9)

The phone interface provides a number of con- trol functions that you can use during a call. To access the in-call options during a call, simply press and hold Menu for a second. The in-call options are not numbered. You cannot, there- fore, access them by the shortcut method.

Mute / Unmute — Switches off or on the com- municator’s microphone. If the communicator is connected to a hands free car kit, Mute turns off the microphone of the car kit, as well.

Hold / Unhold — Hold allows you to put a cur- rently active call on hold, so that another call can be initiated. After you have finished the new call (with Drop call, see below), the original call can be made active again by selecting Unhold. If the held call is the only call, you can also unhold

it by pressing .

Swap — This network function is available when you have one active call and one call on hold. Swap puts the currently active call on hold and activates the other call. In this way, you may con- verse with one party without ending the other call. Instead of using this function, you can press to swap between the calls (if no numbers

have been keyed in right before pressing ).

Drop call — Ends the currently active call. This function is useful when there is an active call, as well as a held call. In such a situation, pressing would terminate both calls.

Join / Private — Join includes a new participant in a conference call if supported by the network. During a conference call, Private allows you to converse privately with a selected call participant.

Transfer — The voice call transfer network ser- vice enables you to connect two voice calls to- gether and disconnect yourself from both calls. See Chapter 4 "Telephone: Conference call - Voice call transfer" on page 4-8.

Data — When you have an alternating call active, this network service changes the mode of the call