Nokia 9000il owner manual Speakerphone audio control, Press

4-4 Telephone settings

Figure 4-1: Flight mode

turn on the phone interface by pressing , and your short messages, faxes and mail will be sent automatically once the communicator receives a GSM1900 network signal.

When the communicator is in the flight mode, emergency calls must be made from the phone interface:

•Press . The phone interface will read

FLIGHT MODE ACTIVE.

‚While the FLIGHT MODE ACTIVE text is visible (for approximately five seconds) you can dial the emergency number (e.g. 911).

ƒPress .

Voice mailbox number — Set a new or change the current voice mailbox phone number. You can call your voice mailbox by pressing Voice mailbox in the Telephone main view.

Note: Your network operator may be able to up- date your voice mailbox number via a spe- cial SMS message. Contact your network operator for details.

Speakerphone audio control

The audio control enables you to adjust the vol- ume level and to activate the communicator’s loudspeaker for handsfree operation.

Note: The speakerphone audio control can only be adjusted during a call.

In the handsfree mode, you can speak and listen to the phone from a short distance away when the cover is open. This function is not available when the cover is closed (except in a car installation).

The Tel. application setting Audio when cover opened (see ”Telephone settings” on page 4-1), determines whether the handsfree operation is activated automatically after you open the cov- er. To activate the handsfree operation manual- ly, press the Audio on command button.

To adjust the speakerphone volume or turn audio off:

•When in a call with the speakerphone acti- vated, press Audio control. A new set of op- tions will appear.

Audio off — Turns the speakerphone audio off.

Audio on — Activates the speakerphone. Volume + — Increases the volume. Volume - — Decreases the volume.

Close — Closes the screen and returns you to the previous screen.

‚Choose the option you want.

The indicator in the audio control view shows the chosen volume level.