Nokia 9000il owner manual Duration and cost Menu

13-12

Change access codes (Menu 5 6)

Within this submenu, you can change the fol- lowing access codes: lock code (Menu 5 6 1), PIN code (Menu 5 6 2), PIN2 code (Menu 5 6 3), Network password (Menu 5 6 4). See Chapter 10 "System: Security" on page 10-2.

Note: The access codes may only include digits 0 to 9.

Closed user group (Menu 5 7)

This network service allows the restriction of out- going calls to and incoming calls from a selected group of people. For details on creating a user group and activating this service, contact your network operator. You may be a member of up to 10 user groups (the groups need not necessarily be assigned numbers from 1 to 10).

Select one of the following options:

None — Calls can be made and received in the normal way. This option overrides all other user group settings. You can use this option only if you are entitled to do so.

Preset — Use a preferential user group that the SIM card owner has agreed upon with the network operator.

Set— Use a particular user group. Calls can be made to or received from the members of the selected group only.

System lock (Menu 5 8)

When the system lock is activated in this menu, the communicator will lock immediately. Even if you remove and replace the battery and switch on the phone interface, the communicator will remain locked.

The communicator can also be locked automati- cally if the Autolock period is turned on in the communicator interface (see Chapter 10 "System: Security" on page 10-2).

To lock the communicator:

•Press Select to activate the lock code prompt.

‚Enter the lock code. The communicator locks immediately.

Detailed menus list

To unlock the communicator, press Unlock and enter the lock code.

Note: To prevent the communicator from locking itself again after the time-out period, de- activate the option in the Security applica- tion settings (see Chapter 10 "System:

Security" on page 10-2).

Duration and cost (Menu 6)

Within this menu, you can view the duration and cost of your outgoing and incoming calls, reset the timers and counters, limit the duration of calls and select whether the call costs are shown in charging units or units of currency.

Note: The actual time invoiced for calls and ser- vices from your service provider may vary, depending upon network features, round- ing-off for billing, taxes and so forth.

Call duration (Menu 6 1)

The communicator provides two call timers which help you monitor the duration of your calls.

Last call duration (Menu 6 1 1)

Shows the duration of the last, or current, out- going or incoming call in hours, minutes and seconds, e.g., 00:02:15.

Note: The duration of incoming calls is not dis- played when you are within your home network.

All calls duration (Menu 6 1 2)

Shows the total cost of all calls made or received with any SIM card that you have used with the communicator.

Clear timers (Menu 6 1 3)

Resets all timers.

Note: There is no way to undo the reset operation.