Nortel Networks 4027 manual Extracting the MEM card from the frame

Handset accessories

not accessible or visible to the user until the installed MEM card is removed from the handset.

Attention: The MEM card feature is optional. You can operate your handset without a memory card. An installed MEM card allows you to personalise the handset and retain subscriber data. The MEM card feature makes the data transfer easier when you change to another handset.

If you use “Resetting the memory card” (page 148) from the General Settings menu, the existing subscriptions are lost. Your handset must be re-subscribed to the DECT system.

Any configuration changes, contacts, messages, call entries, calendar items, and call filter items added after installing the MEM card in the handset are lost.

You must remove the battery pack before you can remove or install the MEM card. Reinstall the battery pack after you remove or install the MEM card. For more information about removing the battery pack, see “Installing the battery pack” (page 17). The MEM card tray is under the battery pack on the back of the handset.

Extracting the MEM card from the frame

To install the MEM card into the handset, you must extract it from the frame.

Attention: A new MEM card is delivered in a larger frame; use the following procedure to remove it from the frame before you install it into the handset.

To extract the MEM card from the frame, perform the following step:

191