Register
Select
Empty
Select
Yes
Save
OK
Save
Save
DECT system configuration
2.Press the Up or Down key to highlight the Register option.
3.Press the Select soft key to start the registration process.
4.Press the Up or Down key to choose Empty if there are less than four subscriptions to the system on the handset, or choose the name of the system you would like to overwrite.
5.Press the Select soft key, and then press the Yes soft key if you want to overwrite a system.
6.Use the Dialpad to enter the PARK code at the PARK prompt, and then press the Save soft key.
Attention: Use a PARK code system ID if more than one DECT system overlaps in your location. If only one DECT system is available, make no entry, and press the Skip soft key.
7.Use the Dialpad to enter the PIN (authorisation code) at the PIN prompt, and then press the OK soft key.
8.Use the Dialpad to enter the system name at the Network name prompt, and then press the Save soft key.
9.Use the Dialpad to enter the phone number assigned to your handset at the Number prompt, and then press the Save soft key.
45
