DECT system configuration
10.Press the Clr key one or more times to return to the idle display.
You can now use the handset to dial and receive calls.
Manually selecting the DECT system
If you subscribe the handset to more than one DECT system, you can manually select which system the handset uses.
To manually subscribe to a DECT system, perform the following steps.:
1.Open the Connectivity menu as shown in “Accessing the Connectivity menu” (page 43).
2.Press the Up or Down key to highlight the Network
select option.
Network select
Select
Select
3.Press the Select soft key.
4.Choose the name of the system from the list, and then press the Select soft key.
The name of the currently active system is highlighted.
5.Press the Clr key one or more times to return to the idle display.
Enabling automatic DECT system selection
If you subscribe the handset to several DECT systems and you configure the automatic search function, the handset automatically selects the nearest system. As a result, your handset automatically logs on to another subscribed DECT system when you leave the effective range of the current system. If this function is active, the handset will attach to an
46
