DECT system configuration
Subscribing the handset to a DECT system
You must subscribe the handset to at least one DECT system before you can use the handset to make a call. The handset can operate with a maximum of four DECT systems, for which the handset stores the name of the system in a subscription record. The subscribed name appears on the handset display whenever the handset enters the range of the DECT system.
Attention: If your supplier preinstalls the handset, you need not subscribe your handset to a system. When the handset is not yet subscribed to a system, the message “Register” appears on the display screen.
Use the
Before you subscribe to a DECT system, obtain the following information from your system administrator:
•PARK code: Use a PARK code system ID only if more than one DECT system overlaps in your location.
•DECT system name: The name of the system to which you subscribe. After you enter the system name, it appears on the idle display.
•Phone number: The local phone number assigned to your DECT handset.
Attention: As soon as you have obtained information about your PIN code, you have only 15 minutes to subscribe the handset set. In 15 minutes the PIN code is deactivated and it is necessary to activate a new one.
To subscribe your handset to a DECT system, perform the following steps:
1.Open the Connectivity menu as shown in “Accessing the Connectivity menu” (page 43).
44
