Call features
Rejecting a call
To reject an incoming call, perform the following step:
Reject
1.Press the Reject soft key during a call alert.
The call diverts to your voice mail system or another number if call forward feature is configured. Contact your system administrator to determine if you can use this feature.
Attention: If you reject or do not answer a call, or if the call is blocked by Caller Filter (only for 4070), the message Number of missed calls: N Show? appears on the display, where N is the number of calls that have been blocked, missed, or rejected.
Press the Yes soft key to open the Missed calls list or press the No soft key to close the dialogue. For more information, see “Missed calls list” (page 79).
Change settings during a call
During a call, you can adjust the headset or loudspeaker volume and mute the handset.
This section describes the following tasks:
•“Adjusting the headset or loudspeaker volume” (page 57)
•“Using mute during a call” (page 58)
Adjusting the headset or loudspeaker volume
During a call, you can change the headset or loudspeaker volume using the volume keys. A bar in the display increases or decreases to indicate the volume setting. A beep sounds at the minimum or maximum volume.
57
