Call features

Using Predial mode

To predial a number, perform the following steps:

1. Use the Dialpad to enter the phone number.

R

2.Press the Call key.

You can add additional digits to the number you dial. For example, in some offices you must add a digit at the beginning of the number to place a call to an outside line.

To edit a number in Predial mode, perform the following steps:

R

1.Use the Right or Left key to position the insertion point.

2.Use the Dialpad to enter the new digits.

Press the Clr key to delete individual digits or to cancel predial.

Long press the * key to insert a comma to indicate a pause when you enter a number.

3.Press the Call key.

4.Press the Clr key to return to the idle display.

Attention: When you predial a number, if the input cursor is positioned after the telephone number, the new digits are inserted at the end of that telephone number. If the input cursor is positioned at any other point, the new digits are inserted in front of the insertion point.

51

Page 51
Image 51
Nortel Networks 4027 manual Using Predial mode