Basic Camera Setup: The Setup Menu
wElectronic VR
Press the dbutton Mz(Setup menu) (A113) MwElectronic VR
Choose whether to use electronic VR (vibration reduction) when taking still pictures.
Auto
When all of the following conditions are met while taking still pictures, electronic VR is applied and the effects of camera shake are reduced.
•The flash is turned off or set to slow sync mode.
•The shutter speed is slow.
•The Continuous setting is set to Single.
•When the subject is dark.
Off (default setting)
Electronic VR is disabled.
When Auto is selected, Rappears on the monitor (A6), and electronic VR is applied depending on shooting conditions.
BNotes on Electronic Vibration Reduction
•Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that Electronic VR is disabled even when the flash mode is slow sync with
•If the exposure period exceeds a certain period of time, Electronic VR will not function.
•Electronic VR does not function when ISO sensitivity is set to any setting other than Auto.
•Electronic VR does not function when using the following scene modes.
•The effectiveness of Electronic VR decreases as camera shake increases.
•Pictures taken using motion detection may be somewhat grainy.
DElectronic VR for Movies
Menus Setup and Playback Shooting,