Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display

Problem

 

Solution

A

 

O(blinks)

Clock not set.

Set clock.

116

 

B

Battery running low.

Prepare to charge or

12

 

 

 

change battery.

 

 

N

Battery exhausted.

Charge or change battery.

12

 

Battery exhausted.

 

 

 

 

 

P

Battery temperature is

Turn off camera, and allow

15

 

Battery temperature

high.

battery to cool down

 

 

high

 

before resuming use. After

 

 

 

 

5 seconds, this message

 

 

 

 

will disappear, the monitor

 

 

 

 

will turn off, and the

 

 

 

 

power-on lamp and flash

 

 

 

 

lamp will blink rapidly.

 

 

 

 

After the lamps blink for

 

 

 

 

three minutes, the camera

 

 

 

 

will turn off automatically.

 

 

 

 

Pressing the power switch

 

 

 

 

also turns off the camera.

 

 

Q(● blinks red)

Camera cannot focus.

•

Refocus.

24, 25

 

 

 

•

Use focus lock.

102

Technical

P

Camera cannot perform

Wait until message clears

25

 

Please wait for the

other operations until

from display automatically

 

 

camera to finish

recording is complete.

when recording is

 

 

recording.

 

complete.

 

Notes

N

Write-protect switch is in

Slide write-protect switch

19

Memory card is write

“lock” position.

to “write” position.

 

 

protected.

 

 

 

 

 

P

Error accessing memory

•

Use approved card.

131

 

This card cannot be

card.

•

Check that connectors

18

 

used.

 

•

are clean.

 

 

P

 

Confirm that memory

18

 

 

 

card is correctly inserted.

 

 

This card cannot be

 

 

 

 

 

 

 

 

 

read.

 

 

 

 

 

137