Basic Camera Setup: The Setup Menu

UMotion Detection

Press the dbutton Mz(Setup menu) (A113) MUMotion detection

Menus Setup and Playback Shooting,

122

Enable motion detection to reduce the effects of subject movement and camera shake when shooting still pictures.

Auto (default setting)

When the camera detects the camera shake or subject movement, the shutter speed will be increased for reducing the effects of them.

However, motion detection does not function in the following situations.

•When the flash mode is set to m(fill flash)

•When ISO sensitivity (A99) is set to Fixed range auto or ISO sensitivity is fixed at a particular value in A(auto) mode

•When Multi-shot 16 (A98) is enabled

•In the following scene modes: Dusk/dawn (A37) and Fireworks show (A39)

Off

Motion detection is not enabled.

The motion detection setting can be confirmed in the monitor while shooting (A6, 21).

The motion detection icon will glow green when the camera detects any vibration and increases the shutter speed. When Off is selected, the icon for the current setting is not displayed.

BNotes on Motion Detection

•Motion detection may be unable to completely eliminate the effects of the subject movement and camera shake in some situations.

•Motion detection may not function if the subject exhibits significant movement or is too dark.

•Pictures taken using motion detection may be somewhat grainy.