Troubleshooting

Problem

Cause/Solution

A

Monitor turns off, and

Battery temperature is high. Turn off camera, and allow

15

the power-on lamp and

battery to cool down before resuming use. After the

 

flash lamp blink rapidly.

lamps blink for three minutes, the camera will turn off

 

 

automatically. Pressing the power switch also turns off

 

 

the camera.

 

 

 

 

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

Notes Technical

143