Basic Camera Setup: The Setup Menu

Menus Setup and Playback Shooting,

iSound Settings

Press the dbutton Mz(Setup menu) (A113) MiSound settings

Adjust the following sound settings.

Button sound

Turn button sound On or Off.

When On (default setting) is selected, a beep will sound once when operations are completed successfully, twice when focus has been locked, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

kAuto Off

Press the dbutton Mz(Setup menu) (A113) MkAuto off

When the camera is on and a period of time passes without any operations having been performed, the camera will enter standby mode (A15) to save power. Once the camera has entered standby mode, the power-on lamp will blink, and if no operations are performed for another three minutes, the camera will turn off. Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

CCanceling Standby Mode

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

• the power switch

• the shutter-release button

• the Abutton

• the cbutton

CNote on Auto Off

Regardless of the option selected, the monitor will remain on for three minutes when menus are displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC

124adapter is connected.