O2 Innovations pmn 3.0Instrument Operation, Locations and Data logging, Example Warm-upDisplays

TARGET Series ENMET Corporation

2.4 Locations and Data logging

The TARGET instrument has the ability to store users or location information and log exposure information. TARGET Trakker software is required for these operations. Further details on its operation and interaction with the instrument is provided in software manual. If desired, contact ENMET or your local distributor.

3.0Instrument Operation

3.1Turning the Instrument On and Off

3.1.1Turning the TARGET On

Press and hold the ON/OFF button. The audio alarm may squeal slightly while holding the ON/OFF button. This is normal. When the instrument turns on, it beeps once and all of the alarm LEDs light up. The TARGET performs a one minute warm-up procedure which includes a self test, checking sensor signals and instrument electronics. At the end of the one minute warm-up procedure, the instrument will beep several times before giving the user the option to perform an auto zero function, or other functions that appear in the Pop-Up menu. See section 3.5 for further information.

ENMET CORP

TARGET Series

GAS MONITOR

Rev:3.0-3.1

02	20.9%
CO 0ppm		H2S 0ppm
Mth0%LEL		BRH 0ppm
Warming up		...30

Example: Warm-up Displays

3.1.2 Turning the TARGET Off

Press and hold the ON/OFF button for approximately three seconds. The instrument shows a three second count down and beeps just before shutting down. To protect the user from accidental shut down, the ON/OFF button must be held for the duration of the three second count down. The audio alarm beeps once to indicate instrument shut down.

POWER DOWN SEQUENCE Press and hold power switch for 3sec

2

Example: Power Down Display

4