b
a
Fig. 116 - CASE BACK
CARE AND CLEANING
Protect your GEO from shock, excessive temperatures, exposure to chemicals, and tampering. Protect the lens against scratches with a Instrument Lens Protector. Small scratches will naturally disappear underwater.
•Soak and rinse the GEO in fresh water at the end of each day of diving, and check to ensure that the areas around the Low Pressure (Depth) Sensor (Fig. 116a), PC Interface Data Port (Fig. 116b), and Buttons are free of debris or obstructions.
•To dissolve salt crystals, use lukewarm water or a slightly acidic bath (50% white vinegar/50% fresh water). After removal from the bath, place the GEO under gently running water and towel dry before storing.
•Transport your GEO system cool, dry, and protected.
INSPECTIONS AND SERVICE
Your GEO should be inspected annually by an Authorized Oceanic Dealer who will perform a factory prescribed function check and inspection for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be completed one year after purchase (+/- 30 days).
Oceanic recommends that you continue to have an inspection performed every year to ensure it is working properly. The costs of annual inspections are not covered under the terms of the 2 year limited warranty.
122