Lift the Hatch with O-ring up and away from the Housing.

Using care not to damage the Contact (Fig. 119a), slide the Battery up and out of the Left side of the Battery Compartment.

Discard the Battery according to local regulations governing disposal of Lithium batteries.

CAUTION: DO NOT allow a metal object to short circuit the top of the Battery which is positive (+) to the negative ( - ) contact of the Battery Compartment.

Inspection

Closely check all of the sealing surfaces for any signs of damage that might impair proper sealing.

Inspect the Buttons, Lens, and Housing to ensure they are not cracked or damaged.

WARNING: If damage or corrosion is found, return your GEO to an Authorized Oceanic Dealer, and DO NOT attempt to use it until it has received factory prescribed service.

Remove the Battery Hatch O-ring and inspect it for any signs of deterioration or deformity. DO NOT use tools to remove the O-ring.

To ensure proper sealing, O-ring replacement is highly recommended each time the Battery is replaced.

a

Fig. 119 - BATTERY

REMOVAL

125