Fig. 117 - BATTERY HATCH REMOVAL (using tool)
Fig. 118 - BATTERY HATCH REMOVAL (without tool)
As an additional precautionary measure to prevent formation of moisture in the Battery Compartment, it is recommended that the Battery be changed in an environment equivalent to the local outdoor temperature and humidity (e.g., do not change the Battery in an air conditioned environment then take it outside during a hot sunny day).
Inspect the Buttons, Lens, and Housing to ensure they are not
cracked or damaged. If there is any sign of moisture in the GEO, DO NOT attempt to use it for diving (NORM, GAUG, or FREE) until it receives proper service by the Oceanic factory or an Authorized Regional Distributor.
Hot Swap
If the new Battery can be inserted within 8 seconds after the old one is removed (referred to as a Hot Swap), settings and
CAUTION: Damage due to improper Battery replacement is not covered by the limited 2 year warranty.
Battery Removal
•Locate the Battery Compartment on the back of the unit.
•Rotate the Battery Hatch clockwise 10 degrees using the special Battery Hatch Tool provided (Fig. 117), or by pushing the lower portion to the left while pushing the upper portion to the right (Fig. 118).
124