![](/images/new-backgrounds/1149551/14955181x1.webp)
2 Operating Your Printer
Maintenance Menu
The Maintenance Menu includes printer maintenance and operating functions described below.
To enter Maintenance Menu mode:
1.Turn off the printer
2.Press and hold MENU1/Menu2 and turn on the printer. USER MNT displays.
3.Press MENU1/Menu2 again to advance to the next category.
4.Press ENTER to invoke a function; or
5.Press > to see other options, then press ENTER to select the option you want. Press
Categor y | Options | Function | |
|
|
| |
MENU RESET |
| Reset Menu (Level 1) to factory settings. | |
|
|
| |
HEX DUMP |
| Print a hex dump of received data for diagnostics. to exit hex dump mode, | |
| turn off the printer. | ||
|
| ||
|
|
| |
DRUM CNT RESET |
| Reset the drum counter after replacing the image drum cartridge. | |
|
|
| |
REC BUF | AUTO*, 8KB, 20KB, | Reserves memory area for receive data; larger setting improves computer | |
100KB, 1MB | return time. | ||
| |||
|
|
| |
OP MENU | ENABLE* | DISABLE=All control panel buttons except | |
DISABLE | ENABLE=All buttons are active. | ||
| |||
|
|
| |
X ADJUST | 0mm to 2.00mm | Adjust horizontal print position in 0.25 mm increments. Plus (+) indicates | |
right movement, minus | |||
|
| ||
|
|
| |
Y ADJUST | 0mm to 2.00mm | Adjust horizontal print position in 0.25 mm increments. Plus (+) indicates | |
downward movement, minus | |||
|
| ||
|
|
|
➯Menu Reset, Drum Count Reset and
OKIPAGE 12i User’s Guide
31
➦