Rolling ASCII Test

!Microline 321 Turbo (wide carriage model)

If you are using 8.5 inch paper to run the test, make sure the paper width selection in the printer menu is set to 8.5 inches. Otherwise, printing on the platen may damage the printer. Refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”

The Rolling ASCII Print Test produces a continuous printout of all 96 ASCII characters in a rolling pattern. The type style set in the printer menu will be utilized.

Use the Rolling ASCII Test to check the following.

• Print Quality

Across the entire length of a line Down the entire page

Line Spacing

Character Formation

The top of the printout has the Printer Model, Emulation, Country Code, and Firmware Revision Level.

To run the test:

Turn the printer off, then press and hold the QUIET key while turning the printer back on.

QUIET

TOF

To exit the test:

• Press SEL.

SEL

SEL

MENU

36 Microline 320/321 Turbo

Page 36
Image 36
Oki 62411601, 320 manual Rolling Ascii Test