Oki 62411601, 320 manual Tear Key and Automatic Forms Tear-Off

Automatic Forms Tear-Off

Forms Tear-Off must be set to ON in the menu for Automatic Forms Tear-Off to occur.

Automatic Forms Tear-Off automatically moves the paper from the initial printing position (print start position) to the tear-off position, after a time interval which you select through the menu.

The top of the page (perforation) is even with the tear bar. The tear bar is located under the clear top of the access cover.

Paper remains in the tear-off position until the printer receives more data. Then, the paper moves back down for printing (retracts to the initial print position).

When printing stops, the paper advances to the tear-off position.

TEAR Key and Automatic Forms Tear-Off

If you press TEAR (1) when Forms Tear-Off is turned on

(activated in the printer menu), the printer retracts the paper
to the Top of Form position.							1
	SEL
			LF	FF/LOAD		TEAR	PARK QUIET
	SEL
	MENU	SHIFT	Micro Feed		Micro Feed			TOF
			Down		Up
	EXIT		GROUP		ITEM	SET	PRINT
	POWER	ALARM			MENU

!The status of the Forms Tear-Off menu setting affects how you set the Top of Form.

To determine the status of the Forms Tear-Off menu setting, refer to “Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF).”

For information on setting the Top of Form, refer to “Using Your Printer, Top of Form, Setting Top of Form, Forms Tear-Off (ON or OFF).”

!If the software package you are using “pauses” while sending data to the printer, Forms Tear Off may be

activated (if it is enabled through the Menu). The pause must be for two or more seconds. No data is lost. Uneven print registration will occur due to the paper movement. If the problem occurs, use the menu to turn off this feature.

!DO NOT use Forms Tear Off with labels or multi-part forms!

!Forms Tear-Off CANNOT be used when the optional pull tractor is engaged.

48 Microline 320/321 Turbo