Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group | Item | Settings (Defaults are set in bold italic) |
Top Feed | Line Spacing | 6 LPI, 8 LPI |
| Bottom Margin | Valid, Invalid |
| Page Width (wide model only) | 13.6", 8" |
| Page Length | 11", |
| Wait Time | 500 mS, 1 sec, 2 sec |
| Page Length Control | By MENU Setting, By Actual Page Length |
|
|
|
Graphics | ||
| 7 or 8 Bit Graphics* | 8, 7 |
| Receive Buffer Size | 1 Line, 16K, 28K, 64K |
| Paper Out Override | No, Yes |
| Print Registration | 0, set in 0.05 mm increments: press SEL to shift registration to the left; |
|
| press SHIFT + SEL to shift registration to the right. |
|
|
|
* Appears only when the MICROLINE Standard emulation is selected.
