Oki 62411601, 320 manual Using Your Printer, Top of Form TOF

Using Your Printer

Top of Form (TOF)

!If you turn the platen knob when the printer is turned on, you will cause the Top of Form to mis-align. Always

turn the printer off before turning the platen knob!

!The factory default setting for the Top of Form (where the printing should begin) is one inch down from the top

of the page.

!Your software may print the first line of print above or below where TOF is set. You may need to adjust the

TOF to meet your software’s needs. Use the procedures in “Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF).”

Top of Form sets the print start position for the printer. It is adjustable in increments of 1/144 of an inch. The amount of adjustment is limited to avoid paper jams.

The first line prints at the red line of the plastic paper shield

(1) on the printhead.

1

38 Microline 320/321 Turbo