Oki 62411601, 320 manual Setting Top of Form, Forms Tear-Off OFF Step B

Setting Top of Form, Forms Tear-Off OFF (Step B)

!If you turn the platen knob when the printer is turned on, you will cause the Top of Form to mis-align. Always

turn the printer off before turning the platen knob!

!Always determine the status of the Forms Tear-Off menu setting BEFORE setting the Top of Form. Refer to

“Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF).”

1Turn the printer ON.

2Press SEL/MENU (6) to take the printer off line. The SEL light goes out.

3Press and hold SHIFT (1).

Then, press LF / Micro Feed Down (2) or FF/LOAD / Micro Feed Up (3), depending on which direction you want to move the paper to align the tear-off position.

42 Microline 320/321 Turbo