Oki C7000 setup guide Check the Printer Settings, Power Save Mode, Duplex Mode, Printer Emulation

18 Check the Printer Settings

Power Save Mode

The printer is set at the factory to enter the Power Save mode after 1 hour.

To change the interval:

☐Press MENU repeatedly until SYSTEM CONFIG MENU appears on the display.

☐Press ITEM + repeatedly until POWER SAVE DELAY TIME appears on the display.

☐Press VALUE (+ or -) repeatedly until the desired setting appears on the second line of the display.

☐Press SELECT.

An Asterisk (*) appears next to the new setting.

☐Press ON LINE to save the setting and exit the menu.

To disable Power Save:

☐Press MENU repeatedly until MAINTENANCE MENU appears on the display.

☐Press ITEM + repeatedly until POWER SAVE appears on the display.

☐Press VALUE +.

DISABLE appears on the second line of the display.

☐Press SELECT.

An Asterisk (*) appears next to DISABLE.

☐Press ON LINE to save the setting and exit the menu.

Duplex Mode

!If you experience curling when printing a file in duplex mode, switch to 28-lb. US Bond paper.

If your printer is equipped with a duplex unit and you want duplex printing to be the printer default:

☐Press MENU repeatedly until PRINT MENU appears on the display.

☐Press ITEM + repeatedly until DUPLEX appears on the display.

☐Press VALUE +.

ON will appear on the second line of the display.

☐Press SELECT.

An Asterisk (*) appears next ON.

☐Press ON LINE to save the setting and exit the menu.

Printer Emulation

The printer is set at the factory to automatically detect the emulation of an incoming print job. To change it to always be PCL or Adobe PostScript, see “Setting the Emulation” under Control Panel, Walk-up Functions in the on-line C7000 Series User’s Guide.

Display Language

If you wish to choose a display language other than English, see “Setting the Control Panel Display Language” under Control Panel, Walk-up Functions in the on-line C7000 Series User’s Guide.

26