Oki S700 manual Menus And Settings, Menu Key, Explanation

MENUS AND SETTINGS

This section describes the menu functions accessed via the Scancopier’s operator panel.

MENU KEY

Settings changed in this menu are saved and become the new “user default” settings. Use the Menu key to advance through the items, and the ▲/▼ keys to change their settings. Press the Select key to activate the currently displayed setting. An asterisk (*) indicates the current active setting.

In the following table bold type is used to indicate factory default settings. To restore all settings to their factory defaults, press and hold the All Clear key for about 5 seconds.

Item	Setting	Explanation
Size	A4*, Letter*, Legal	Selects the scan area. *Default
		setting is A4 in Europe, and Letter
		in other territories.
Media	Plain Paper, Ultra Heavy,	Selects the type of media to be
	Transparency	printed on.
Input Tray	Auto, MP	Selects the printer feed tray, which
		depends on your printer.
Duplex	Off, ShortEg, LongEg	Selects single-sided (Off) or two-
		sided copying (from single-sided
		originals).
Collate	On, Off
Staple	Off, On	Selects output stapling if the
		printer supports this feature.
Punch	Off, Top Edge, Left Edge	Selects output hole punching if the
		printer supports this feature. (See
		note with “Output” setting below.)
Output	Prt/F-Dn, Prt/F-Up, Fin/F-Up,	Selects output stacking tray if the
	Fin/F-Dn	printer supports this feature.
		Select Fin/F–Dnif you want to use
		the Staple function.
Mirror	Off, On	Off for normal copying, On for
		mirror image.
Printer	Printer Name	Set to show currently attached
		printer model.

MENUS AND SETTINGS > 44