2.In the left hand pane, select the required printer then click the Add button to insert it into the right hand pane.
NOTE
If you attempt to load more than 6 printer profiles to the S700 an error message appears. If this happens, click OK on the error message dialog box then select a printer you no longer require in the right hand pane and click the Delete button to remove it and free space, before repeating Step 2.
3.Select the new printer you have just transferred to the right hand side and click the Update button to download the profile to the Scancopier.
4.When the progress bar indicates 100% you have successfully downloaded the profile to the Scancopier.
5.On the S700 control panel, press the Menu button repeatedly until Printer Select is visible on the LCD panel. Use the ▲/▼ keys until your new printer is visible and then press the Select button.
FIRMWARE UPDATE
To load new firmware into the Scancopier, carry out the following.
1.Download the new firmware directly to the S700 Printer Profile Utility folder.
2.Click the Update Firmware button on the Printer Profile Utility screen, browsing if necessary to the required file.
3.Check that the new firmware has loaded successfully by inspecting the firmware version on the Scancopier LCD display. You can access this by pressing the Select key repeatedly and then the All Clear key.
APPENDIX A - PRINTER PROFILE UTILITY > 57
