CONNECTING THE CABLES
Connect the cables as shown.
1 | 2 | 3 | 4 | 5 |
1.Parallel printer cable – to parallel data port on printer.
2.Parallel PC cable – to PC parallel port (LPT1). Only required if you also wish to print from your PC. Printing is accomplished normally from your PC via LPT1 (the primary parallel printer port). Data passes through the scanner, unchanged, to the printer. This operation is called “Pass Through Mode.”
3.USB cable – to PC’s USB port. Only required for scanning images into PC. Does not support printing from PC via USB.
4.ADF cable – attached to ADF if you have one.
5.Power cable – to AC power via external power unit provided. Do NOT use any other power unit.
CAUTION!
Do not connect AC power to the S700 until you have unlocked the scanning head, otherwise damage to the Scancopier may result.
INSTALLATION > 14
