JOB OPTIONS KEY
This key is used to change settings for the next copying job. Press the Job Options key to advance through the items, and the ▲/▼ keys to change their settings. Pressing Select is not required, since these values are not saved.
The default values for each item are those chosen in the Menu key table above. Values changed with this key will revert to their default settings after about 3 minutes of inactivity.
Press All Clear to reset all temporary settings back to their user default values (those defined using the Menu key) immediately.
Press and hold All Clear to reset all settings back to their factory defaults.
Item | Settings | Explanation |
|
|
|
Media | Plain Paper, Ultra Heavy, | Selects the type of media to be |
| Transparency | printed on. |
|
|
|
Duplex | Off, ShortEg, LongEg | Selects |
|
| |
|
| |
Input Tray | Auto, MP | Selects the printer feed tray. |
|
|
|
Output | Selects output stacking tray if the | |
| printer supports this feature. | |
Collate | On, Off |
|
|
|
|
Fit to A3 | Off, On | Adjusts magnification to fit A3 |
|
| paper if printer supports this |
|
| size. |
Punch | Off, Top Edge, Left Edge | Selects output hole punching if |
|
| the printer supports this feature. |
|
|
|
Staple | Off, On | Selects output stapling if the |
|
| printer supports this feature. |
|
|
|
MENUS AND SETTINGS > 46