The Procedure Up to Projecting to the Screen

Perform setup adjustments in the following order.

1 Position the projector

See “Screen Size and Projection Distance” on Pages E-16and E-17.

Determine the locations to set up the screen and the projector.

2 Connect the video equipment and personal computer

Connect your equipment to the projector.

When the personal computer has a DVI connector or a mini D-sub 15-pin connector See “Connections with PC Connectors” on Page E-18or E-19.

When the video equipment has a video connector or an S-video connector See “Connections with Video Connectors” on Page E-21.

When the video equipment has a YCbCr connector or a YPbPr connector

See “Connections with Component Video Sources” on Page E-22.

When playing the audio through the built-in speaker of the projector

See “Connections with the AUDIO Jack” on Page E-23.

3 Connecting the power cable and switching on the power

See “Operating” on Page E-24.

See “Finishing” on Page E-25.

4 Switching on the power of the personal computer and video equipment

5 Properly adjust the projection image to the screen

See “Projection Screen Position Adjustment” on Page E-26.

6 Focusing

See “Focus Adjustment” on Page E-27.

7

8

Selecting input equipment

See “Input Selection” on Page E-28.

Adjust the screen or video image

Adjust the image to the optimum condition as required.

See the Table of Contents (Adjustments and Settings) for the adjustment items.

About DLP projectors

Though careful attention is paid to providing optimum quality, please note that with DLP type projec- tors, in rare cases there may be black spots or bright spots among the picture elements.

Note

*Please purchase a screen.

*A DVI-D cable (Stock No. 205202), which is available separately, is required for connections with the DVI connector of the personal computer.

*A component cable (Stock No. 205203), which is available separately, is required to connect a DVD player or other equipment with YCbCr connectors.

E-15