General Operation
Automatic Adjustment of Analog RGB
This function automatically adjusts the position shift of the analog RGB input signal, the size of the picture, vertical striping, and color infidelity.
Normally, this function is adjusted automatically at the time of signal selection.
Main unit operation/Remote control operation: Press the
AUTO button. (This will not function while the menu or the quick menu is displayed.)
A press of the AUTO button starts the automatic adjustment.
MENU
SOURCEAUTO
QUICK
MENU
ON POWER OFF
FREEZE MUTE PIP
DIGITAL RGB YPbPr
VIDEO
QUICK ASPECT AUTO
Note
*If the display position is shifted, vertical lines appear on the picture, or the projection is not good even after using automatic adjustment, please perform image adjustment manually. See “Picture Adj. / Fine Picture / H Position / V Position” on Page
*When the image extends beyond the boundaries of the screen or is smaller than the screen, set Aspect to “Auto”. See “Selection of Aspect Ratio” on Page