Olympus VP--1 Resolution / Frequency, Lamp Timer

Info.

Resolution / Frequency

This function displays the resolution and frequency of the detected input signal.

This information will not be displayed unless an analog RGB or digital RGB signal is input and an Analog RGB or Digital RGB input selection is made.

Status

Factory Default

Lamp Timer Reset

Resolution	1024 768
Frequency	60Hz, 48kHz
Lamp Timer	12h

Lamp Timer

This function displays the lamp timer.

When the lamp timer exceeds 1000 hours, “Replace the Lamp Cartridge” is displayed on the screen for 10 seconds at one minute intervals.

Replace the lamp with a new one.

See “Replacing the lamp cartridge” on Page E-66for information about lamp cartridge replacement.

When 1100 hours is exceeded, “Warning!! System Shutdown” is display for 10 seconds and the power is switched off.

Status

Factory Default

Lamp Timer Reset

Resolution	1024 768
Frequency	60Hz, 48kHz
Lamp Timer	12h

E-60