When the STATUS Indicator is Lit/Blinks
When the STATUS indicator of the main unit operation panel is lit or blinks, notification is being given of the irregularities de- scribed.
STATUS indicator | POWER indicator | ||
| STATUS | POW |
|
|
| ER | |
|
|
| |
POWER |
|
| MENU |
| SOURCE |
| |
|
|
| |
| QUICK |
| AUTO |
| MENU |
| |
AUDIO |
|
|
|
VIDEO |
|
|
|
STATUS Indicator POWER Indicator | Action to Take |
The temperature has become abnormally high.
*The thermal protector is activated. If the room tem-
perature is high, move the projector to a cool lo-
cation. If the internal temperature of the projector
STATUSPOWERis high, check the ventilation holes of the cooling fan and clean them if they are obstructed.
*When the thermal protector is activated, the power is switched off and even if the power is soon
Blinks red | Lit red | switched back on, the power might not actually | ||
(0.5 s lit / 0.5 s off) |
|
| be supplied to the projector. Should this happen, | |
|
|
|
| wait one minute and then switch the power on |
|
|
|
| again. |
|
|
|
| If the power still does not come on, wait approxi- |
|
|
|
| mately 60 minutes until the internal temperature |
|
|
|
| of the projector drops, then switch on the power |
|
|
|
| again. |
|
|
|
| When the aforementioned procedure does not |
|
|
|
| solve the problem, please contact Olympus Digi- |
|
|
|
| tal Technical Support. |
|
|
|
|
|
STATUS | POWER | The lamp will not light up. | ||
|
| Wait one minute or longer while the lamp lighting volt- | ||
|
|
|
| |
|
|
|
| age irregularity detection protector is activated and |
|
|
|
| |
|
|
|
| switch the power on again. If the problem still per- |
Blinks red |
|
| sists, unplug the power cable and contact Olympus | |
|
| Digital Technical Support. | ||
(1 s lit / 1 s off) |
|
| ||
|
|
| ||
When the lamp burns out during operation: Blinks amber for 90 seconds and then is lit amber
When the lamp does not light from the beginning: Lit amber