View
Keystone Save
This function is used to save the keystone adjustment values.
Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the power cable has been disconnected and then reconnected.
1.Select item name “Keystone” and press the cursor () but- ton. The sub menu will open.
2.Select “Keystone Save” with the cursor (▲▼) buttons and
set with the cursor ( ) buttons (or with the main unit (
) button).
Aspect | Auto |
|
|
|
| |||
Filter | 3 |
|
|
|
|
| ||
Projection |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| V Keystone |
| 0 |
| – |
|
| + |
|
|
|
|
| ||||
|
|
|
|
|
| |||
| H Keystone | 0 |
| – |
|
| + | |
|
|
|
| |||||
|
|
|
| |||||
| Keystone Save |
|
|
|
|
| Off | |
Off .............. | The keystone adjustment values return to the initial values when the power cable is unplugged. |
On ............... | The keystone adjustment values are retained in storage even when the power cable has been unplugged. |
Note
Regardless of whether Keystone Save is set to “On” or “Off”, when projection is from the standby condition, the picture is projected using the previous keystone adjustment values.
Picture in Picture
This function displays the picture from the VIDEO jack as a
1.Select item name “Picture in Picture” and press the cursor () button. The sub menu will open.
2.Select “Size” or “Position” with the cursor (▲▼) buttons and set with the cursor ( ) buttons (or with the main unit (
) button).
Size Settings
OnOff
AspectAuto
Filter3
Projection
Keystone
Picture in Picture
AspectAuto
Filter | 3 |
|
| |
Projection |
|
|
| |
|
|
| ||
|
|
|
|
|
Keystone |
|
|
| |
|
|
| ||
|
|
|
|
|
Picture in | Size |
| Off | |
| Position |
|
|
|
Position Settings
Display at upper left of main screen
Display at upper right of main screen
Display at center of main screen
Display at lower left of main screen
Display at lower right of main screen
Note
•Sizes of a
•The adjustment display and picture will not appear unless a signal is input to the PC connector.