General Operation
Using the Quick Menu
This function permits commonly used adjustments to be performed quickly.
Note that the Quick Menu will not be displayed unless the signal of the connected equipment is input. Please select the input that you wish to adjust.
Main unit operation
(1)A press of the QUICK MENU button brings up the quick ad- justment display. Further presses allow selection of the de- sired adjustment display.
(2)Press the 
or 
button to make the adjustment.
(3)To close the display immediately, press the MENU button. In the absence of operations for a period of about 10 sec- onds, the display will close automatically.
Remote control operation
(1)A press of the QUICK button brings up the quick adjustment display. Further presses cause the adjustment display to change in sequence.
The adjustment display can be selected with use of either the cursor ▲ or ▼ button.
(2)Press the cursor or button to make the adjustment.
(3)To close the display immediately, press the CANCEL button. In the absence of operations for a period of about 10 sec- onds, the display will close automatically.
MENU
SOURCE 
AUTO
QUICK
MENU
(1)(3)
QUICK ASPECT AUTO
MENU | CANCEL |
| ENTER |
| VKSTN |