Connecting Personal Computers and Video Equipment

●Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions.

Connections with PC Connectors

Please check the following matters before making connections to the personal computer.

*Suitable resolution is 1024768 pixels (XGA), and the displayable resolution is 12801024 pixels (SXGA).

Note that input of a resolution that exceeds the displayable resolution will cease to be projected and should this be the case, you will need to change the resolution to a displayable resolution at the computer side. Check with “Table of Supported Frequencies” on Page E-70.

*The setting method of the personal computer will differ depending on the personal computer that you are using. For information, read the instruction manual for your personal computer, read the on-line help, or contact the manufacturer of your personal computer.

Personal Computers with a DVI Connector

*Make the connection with a DVI-D cable (which is available as an option) and the PC connector of the projector.

When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs and fasten to the connector of the main unit.

Monitor output

AUDIO VIDEO

Personal computer

DVI-D cable (Available as an option. Stock No. 205202)

Note

*Please see Page E-28“Input Selection” for information about making input selections.

*This projector uses a 29-pin DVI connector that supports the digital interface. Digital signal TMDS (Transition Minimized Differential Signalling) of the DVI (Digital Visual Interface) standard is used.

E-18