Olympus VP--1 View, Aspect

View

●Perform this operation while projecting the picture for which the adjustment/setting will be made.

●Select the menu name “View”.

See “Menu Operation Method” on Pages E-37to E-45for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages E-44and E-45.

Aspect

This function sets the horizontal and vertical picture propor-			Aspect	Auto
tions of the input signal.
			Filter	3
Select the item name “ASPECT” and select the setting contents			Projection
			Keystone
with the cursor ( ) buttons.
			Picture in Picture
Personal Computer Signal
Auto ............ Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable size
Real ............ Projects the input signal without pixel conversion
Input Signal	Auto	Direct		Real
The setting is higher
than the display reso-
lution of the projector.

The setting is lower than the display resolution of the projector.

Video Signals
Auto ............	While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the bound-
	aries of the screen. The top and bottom of the 16:9 image becomes black.
Wide ...........	Projects to fill the full width with the entire image at 16:9.
	(This feature is used to project a squeezed image in a proper aspect ratio.)
Zoom ..........	Projects only the 4:3 portion within 16:9 image to fill the screen.
	(Portion that extend off screen is cut.)
		Aspect ratio selection	Auto	Wide	Zoom
		4:3 screen

16:9 screen

E-51