Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter the standby mode.
STATUS POWER
Lit amber
To wall outlet
Firmly plug in all the way.
|
| STATUS | POWER |
|
|
|
|
| |
P |
|
|
|
|
OW | ER |
|
|
|
| SO |
|
|
|
| UR |
|
| |
|
| CE |
|
|
| M | Q |
|
|
| U | AU |
| |
|
| EN ICK | TO | |
|
| U |
| |
AUDIO
VIDEO
M | ENU |
|
PC
2 Turning on the projector power
Main unit operation: Press and hold the POWER button for 1 second.
Remote control operation: Press the POWER ON button.
ON POWER OFFSTATUS POWER STATUS POWER STATUS POWER
| Blinks green | Lit green |
POWER | (Approximately 60 | Power is on |
seconds) |
|
The POWER indicator changes to a blinking green and lights steadily after about 60 seconds. The projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
3 Switch on the power of the connected equipment