Info.

●Select menu name “Info.”.

See “Menu Operation Method” on Pages E-37to E-45for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages E-44and E-45.

Status

This displays information about the unit.

Select item name “Status” and press the cursor () button.

Display Contents:

Projector model, firmware version, and the internet home page address of OLYMPUS CORPORATION.

Factory Default

Status

Factory Default

Lamp Timer Reset

Lamp Timer

12h

VP Series

Version:7,0,0,0,0 www . olympus . com

This function returns the adjustments and settings of all the input sources to the standard factory default values.

Select item name “Factory Default” and press the cursor () but- ton.

The display “Press "ENTER" to Factory Default Set” will appear.

A press of the ENTER button sets the factory defaults.

Main unit operation: Press the (AUTO) button.

Items that are not set to the factory default:

Projection method,YPbPr, Language, and Lamp Timer

Status

Factory Default

Lamp Timer Reset

Lamp Timer

12h

Press "ENTER" to Factory Default Set

Lamp Timer Reset

This function resets the lamp timer. Be sure to perform the reset operation when the lamp cartridge has been replaced.

Select item name “Lamp Timer Reset” and press the cursor () button.

The display “Press "ENTER" to Lamp Timer Reset” appears.

A press of the ENTER button resets the timer

Main unit operation: Press the (AUTO) button.

Status

Factory Default

Lamp Timer Reset

Lamp Timer

12h

Press "ENTER" to Lamp Timer Reset

E-59