EN00_L-MS30.book Page 21 Tuesday, September 2, 2003 4:19 PM

Connecting Speakers

The wall-mount fittings

Attaching the fitting

Using the screws provided, attach the fittings to the rear of the speaker cabinet. You can secure the speakers so they do not move by stacking up two of the provided satellite speaker cork stoppers and attaching them as indicated in the illustration. Attach the fittings in two places on the center speaker (SKC-L30) and one place on the satellite speaker (SKM-L30).

Wall-mount fitting

Screw

SKM-L30

Cork stopper

Wall-mount fitting

SKC-L30

Screw

Cork stopper

Note

When mounting speakers on the wall, be sure to check the strength of the wall before mounting. The weight the screws are able to support differs depending on the material used for the wall and the position of the wall supports. Make sure you use sturdy, long screws with a head diameter of no more than 10 mm and a shaft diameter of no more than 4 mm. (If you are unsure about which screws to use, ask a shop assistant for advise.)

21

Page 21
Image 21
Onkyo L-MS30 instruction manual Connecting Speakers, Wall-mount fittings, Attaching the fitting, SKM-L30, SKC-L30