Onkyo L-MS30 Turning on the subwoofer SKW-L30, Connect the power cord to a wall outlet, Power

EN00_L-MS30.book Page 26 Tuesday, September 2, 2003 4:19 PM

Connecting the Power/Turning on the DVD receiver

Before connecting
		■ Turning on the subwoofer (SKW-L30)
•	Make sure that all the connections from pages 17 to 25 are
	complete (the connection to the TV is required).
•	Turning on the DVD receiver may cause a momentary power
	surge, which might interfere with other electrical equipment such
	as computers. If this happens, use a wall outlet on a different

circuit.

SKW-L30

•The DR-L30 is shipped with the POWER in the ON position

(_ ON). When the power cord is plugged in for the first time, the DR-L30 will automatically turn on.

POWER STANDBY indicator

STANDBY/ON

POWER

To wall outlet

1 Connect the power cord to a wall outlet.

2 Press POWER to the ON position.

The indicator changes from red to green when the subwoofer receives a signal.

STANDBY/ON

indicator

1 Connect the power cord to a wall outlet.

To wall outlet

2 Press POWER on the DVD receiver turn on the DVD receiver.

3 The display on the DVD receiver’s front panel light.

•To put the DVD receiver in the standby mode, press STANDBY/ON on the remote controller. Be sure to set the volume to minimum before putting the DVD receiver in the standby mode for the next use to avoid sudden loud sound reproduction.

•While in the STANDBY mode, the DVD receiver can receive signals from the remote controller.

Setting the STANDBY/ON button on the remote controller to set the DVD receiver to standby does not turn off the power completely.

26