Onkyo L-MS30 Speaker Setup, Adjusting Each Speaker’s Relative Volume Balance Test Tone

EN00_L-MS30.book Page 33 Tuesday, September 2, 2003 4:19 PM

Speaker Setup

Adjust each speaker’s relative volume balance so that the volumes of all speakers’ test tones sound equal at the listening position.

Notes

•As the subwoofer (SW) has a special playback band, normal adjustment is not possible with the test tone. Please adjust the subwoofer while listening to actual music (see page 35).

•Make sure you adjust the test tone volume by Test Tone before playing back discs.

LEVEL +/– SETUP

Adjusting Each Speaker’s Relative

Volume Balance - Test Tone

Initial setting is 0 dB for all speakers.

1 Press SETUP for more than 3 seconds.

The test tone is played back from the front Left speaker. Adjust the MASTER VOLUME so that it is slightly loud and fix it there.

2 Press LEVEL +/– to control the speaker level.

The speakers will be switched as follows in intervals of about 2 seconds.

→L → C → R → RS → LS

Adjust the volume with the LEVEL +/– buttons while the indicator is flashing so that the volume from all speakers except the subwoofer (SW) appears the same. Level adjustments possible in the range from –10 dB to +10 dB. After all speakers have been adjusted, operate the Delay time setting (see page 34).

33