Onkyo TX-NR1000 instruction manual Index Parts and Facilities-Continued, ALISTENING MODE button

Index Parts and Facilities—Continued

ALISTENING MODE button [59]

Press this button to enter the setup mode for the listening mode. Turning the [SELECT/PRESET] allows you to select the listening mode. To confirm your selection and exit the setup mode, press the [SELECT/PRESET].

BAUDIO SELECTOR button [55]

Press this button to enter the audio selector mode. Turning the [SELECT/PRESET] allows you to select the audio mode.

CTONE button [52]

Press this button to enter the tone adjustment mode. Turning the [SELECT/PRESET] allows you to select the channel to adjust the tone. To adjust the tone level, turn the [CONTROL/TUNING].

DZONE 2 button [68]

Press this button to enter the Zone 2 configuration mode. Turning the [SELECT/PRESET] allows you to select the input source for Zone 2. Also, if you want to configure other Zone 2 settings such as standby/on setting, listening mode, volume adjustment, audio selector mode, and display settings, press this button first.

EREC/ZONE 3 button [68, 70]

Press this button to enter the Rec/Zone 3 mode. Turning the [CONTROL/TUNING] allows you to select the input source for the Rec mode or Zone 3. Also, if you want to configure the setting for Zone 3 including standby/on setting or volume adjustment, press this button first.

Note:

Recording and Zone 3 operations uses the same circuit and therefore cannot be used at the same time.

FVIDEO 7 INPUT terminals

For connecting a video camera or game device.

GZONE 3 LEVEL button [68]

Press this button to enter the volume adjustment mode for Zone 3. Turning the [SELECT/PRESET] allows you to adjust the volume.

HCONTROL/TUNING dial [52, 60, 68, 70, 86]

When the input source is FM or AM, turning this jog dial allows you to select the frequency to receive. When used with other buttons, this [CONTROL/ TUNING] dial is used to select the mode settings or values. Also the dial is pressed to confirm the settings or values you select.

ISETUP button [86]

JEXIT button [86]

Press this button to return to the last menu. To exit from the setup mode, press the [SETUP] button again.

KSELECT/PRESET dial [59, 61, 63, 68, 71, 86]

When the input source is FM or AM, turning this jog dial allows you to switch between your preset stations. When used with other buttons, the [SELECT/PRESET] dial is used to select the mode settings or parameters. Also the dial is pressed to confirm the settings or parameters you select.

LZONE 2 LEVEL button [68]

Pressing this button enters the volume adjustment mode for Zone 2. To adjust volume, turn the [SELECT/PRESET].

MDIMMER button (Other than European models) [52]

Press to set the brightness of the front display. There are four settings available: normal, dark, very dark, and volume only.

For European models, this function can be operated only with the remote controller.

MRT/PTY/TP button (European models only) [63]

This button is only available on European models. Press this button to tune into the Radio Data System (RDS) for FM broadcasting. RDS was developed within the European Broadcasting Union (EBU) and is available in most European countries. Each time the button is pressed, the display changes from RT (radio text) to PTY (program type) to TP (traffic program) and then back to RT again.

NMEMORY button [61]

Press to assign the radio station, to which you are currently tuned, as a preset channel or press to delete a previously preset station.

OTUNING MODE button [60, 61]

This button is used to select the Auto or Manual Tuning Mode.

PPHONES jack [52]

This is a standard stereo jack for connecting stereo headphones.

Press this button to enter the setup mode. First, select the parameter to change by turning the [SELECT/PRESET] and press the [SELECT/ PRESET] to confirm the parameter. Then, change the parameter value by turning the [CONTROL/ TUNING] and press the [CONTROL/TUNING] to confirm the value.

13