Onkyo TX-NR1000 Displaying Radio Text RT, Performing a PTY Scan, Performing a TP Scan, display

Listening to RDS Broadcasts (European models only)—Continued

TUNER

								MASTER VOLUME
STANDBY/ON
POWER	DISPLAY		TAPE 1	TAPE 2	TUNER	PHONO	C D	NET AUDIO
	DVD	VIDEO 1	VIDEO 2	VIDEO 3	VIDEO 4	VIDEO 5	VIDEO 6	VIDEO 7

RT/PTY/TP

SELECT/PRESET

Displaying Radio Text (RT)

If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display on the TX-NR5000E. If the station does not, this function will be ignored.

RT/PTY/TP	To display the radio text, press the
	[RT/PTY/TP] button once.

•If the current station you are listening to is not an RDS station, only the frequency of the station will appear.

•If “Waiting” appears on the display, more time is required to receive the RT information. When the information is received, the characters will scroll across the front display.

•If “No Text Data” appears on the display, RT informa- tion is not available.

•The display shows the frequency for 3 seconds and returns to program service name.

Performing a PTY Scan

1	Press the [TUNER] input source
TUNER	button and select the FM input
	source.
2	Press the [RT/PTY/TP] button
RT/PTY/TP	twice.
	The current program type appears on the
	display.
3	Using the [SELECT/PRESET] dial,
SELECT/PRESET	select the PTY program type you
	desire.

4		Press the [SELECT/PRESET] dial.
	SELECT/PRESET	The TX-NR5000E will scan until it
		reaches a station of the program type you
		selected. It will then stop briefly at that
		station before continuing on until it
		reaches the next station. Pressing the
		[SELECT/PRESET] dial stops the PTY
		scan at that point. If you press the [RT/
		PTY/TP] while “NONE” is displayed,
		“PTY ?” will appear. In this case, return
		to step 3.
5		Press the [SELECT/PRESET] dial
		when it reaches the station that
	SELECT/PRESET
		you want to listen to.
		“Not Found” will appear when no RDS
		signal is being received from the station.
Performing a TP Scan
1		Press the [TUNER] input source
		button.
	TUNER

2		Press the [RT/PTY/TP] button
		three times.
	RT/PTY/TP
		“[TP]” will appear if the current station
		is broadcasting TP signals. This station
		will periodically broadcast traffic infor-
		mation. To find a different station, pro-
		ceed to the next step. Also, if “TP” is
		displayed, proceed to the next step.
3		Press the [SELECT/PRESET] dial.
		The TX-NR5000E will scan until it
	SELECT/PRESET
		reaches a station broadcasting traffic
		information. If “Not Found” appears on
		the display, a TP station cannot be
		located.

63