Onkyo TX-NR1000 Front Panel Display, Index Parts and Facilities—Continued, AUTO indicator

Index Parts and Facilities—Continued

BRS 232

This port is for connecting the TX-NR1000/ TX-NR5000E to home automation and external controllers.

CPRE OUT A/B

To use the TX-NR1000/TX-NR5000E as a preamplifier, connect a power amplifier to this jack.

DSPEAKERS A/B

These terminals are for connecting the speakers. Two sets of home theater connections are available (simultaneous playback of different sources in each of two home theaters is not supported).

Depending on your system, various speaker connections will be available. For example, you can use the surround back speakers for playback in a different room.

EAC OUTLET

The TX-NR1000/TX-NR5000E is equipped with AC mains outlets for connecting the power cords from other devices so that their power is supplied through the TX-NR1000/TX-NR5000E. By doing this, you can leave the connected device turned on and have the [STANDBY/ON] button on the TX-NR1000/TX-NR5000E turn on and off the

device together with the TX-NR1000/ TX-NR5000E.

The shape, number, and total capacity of the AC outlets may differ depending on the area of purchase.

Caution:

Make sure that the total capacity of the components connected to the TX-NR1000/TX-NR5000E does not exceed the capacity that is printed on the rear panel (e.g., AC 120V - 60Hz SWITCHED 120W 1A MAX.).

FAC INLET

This connector is for connecting the supplied power cord.

GIR IN/OUT

These connectors are for connecting the remote sensor of a multiroom kit (sold separately).

The connectors are provided for main room, Zone 2, and Zone 3.

H12V TRIGGER OUT

These connectors are used to connect to the 12V TRIGGER IN terminal of a component. Available connectors are one with maximum current capacity of 200 mA and four with 100 mA.

Front Panel Display

AListening mode or input format indicators

One of these indicators lights to show the format of the current input source. In addition, one of the listening mode indicators lights to indicate the current listening mode.

BMultifunction display

During normal operation, shows the current input source. When the FM or AM input is selected, shows the frequency and preset number. When the [DISPLAY] button is pressed, shows the listening mode and input source format.

CAudio input signal path indicators

Shows from which terminal the audio input signal is coming.

DMAIN A/B indicators

Indicates which room is currently in use.

ESLEEP indicator

Lights when the sleep timer is turned on.

FTuning indicators

AUTO indicator

Lights when receiving FM broadcasts in the stereo mode. Turns off when placed into the monaural mode.

RDS indicator (European models only)

Lights when an RDS station is being received.

TUNED indicator

Lights when a radio station is being received.

MEMORY indicator

Lights when the [MEMORY] button is pressed to preset a radio station.

FM STEREO indicator

Lights when an FM broadcast station is being received in stereo. Turns off when placed into the monaural mode.

GProgram format display

When the input source is DVD video, Super Audio CD, or compressed digital audio signal such as Dolby Digital and DTS, the channels corresponding to the input source light.

HVolume display

Shows the volume level.

IVideo input signal path indicators

Shows from which terminal the video input signal is coming.

15