Onkyo Enjoying Net Audio—Continued, Networking Your TX-NR1000/TX-NR5000E, Notes

Enjoying Net Audio—Continued

Notes:

•To use Internet radio with the TX-NR1000/ TX-NR5000E, your broadband Internet connection needs to be up and running and able to access the Web. Please consult your ISP if you have any prob- lems with your Internet connection.

•The TX-NR1000/TX-NR5000E uses DHCP and AutoIP to configure its network settings automatically. If you want to configure these settings manually, see page 121.

•The TX-NR1000/TX-NR5000E does not support PPPoE settings, so if you have a PPPoE-type Internet connection, you must use a PPPoE compatible router.

•Depending on your ISP, you may need to specify a proxy server to use Internet radio. If your PC is con- figured to use a proxy server, use the same settings (See page 121).

Networking Your TX-NR1000/TX-NR5000E

To connect the TX-NR1000/TX-NR5000E to your Ethernet network, plug one end of a CAT5 Ethernet cable into the ETHERNET (Net-Tune) port, and plug the other end into a LAN port on your router or switch.

The following diagram shows how you can connect the TX-NR1000/TX-NR5000E to your Ethernet network. Here it is connected to a LAN port on the router, which has a 4-port 100Base-TX switch built-in.

You can connect any number of TX-NR1000/TX-NR5000Es to the network, and Net-Tune Central can serve up to three clients simultaneously, so you can enjoy Net-Tune in three separate rooms simultaneously. The following diagram shows a Net-Tune network with two TX-NR1000/TX-NR5000Es.

TX-NR1000/TX-NR5000E

OPTICAL

COAXIAL R L R L IN IN

IN 1 IN 2 RS232

IN 4

PH

Y

P

Y

IN 1

ETHERNET

R	L
R	L	R	L

P

P12V TRIGGER

OUT

IN 3

P

Y IN 2

PY

P

P

P

IR

Internet radio PC

PRE OUT A SURR R SURR BACK R ASSIGNABLE FRONT R

CENTER FRONT L SURR BACK L ASSIGNABLE SURR L

L

A

SPEAKERS A

AC OUTLET

AC INLET

R

B

FRONT R (BTL)

PRE

OUT B

Internet radio

Modem

Router

SPEAKERS B

FRONT L (BTL)

UDC/UDT MODEL NO. TX-NR1000

ETHERNET (Net-Tune)

To the WAN side

Modem

To the WAN side

Router

To the LAN side port

To the LAN side port

To the LAN	To the LAN side port
side port

To the LAN side port

PC

Room 1

Room 2

LAN port/

Ethernet, etc.

You can install Net-Tune central on several networked computers and use the TX-NR1000/TX-NR5000E’s Select Server setting to select the server whose music database you want to access (See page 95).

About Network Configuration

When you use a broadband router with the DHCP function enabled, the network settings will be configured automati- cally. In this case, you do not have to make any settings using the setup menu. If you disabled the DHCP function on the broadband router, configure the network settings manually referring to page 121.

73